Inexpensive DIY Batten Wall Using Lattice Strips

Tutorial: How to use lattice strips as an uncomplicated, economical different to install a Do it yourself batten wall for including classic character to simple partitions.

Lattice strips are the MVP of this Do-it-yourself batten wall challenge!

I signify they genuinely are the unsung hero of a large amount of minimal DIYs and crafts all around right here. (Recall that shower curtain artwork we framed with lattice strips a while again?) This time it essential a highlight in the breakfast nook.

A DIY batten wall behind brass vintage sconces above a green banquette bench

Since we form of have an dependancy to intricate wall molding about here, it’s certainly no shock at all that following we finished setting up and painting our Facebook Market banquette find in the breakfast nook, Robert and I seemed at every other and stated, “Something’s missing.”

Individuals clean partitions needed character! And lattice could do the career inexpensively. Since molding is 1 of my favourite strategies to make a home appear magnificent.

A breakfast nook with olive green banquette, herringbone floors, white walls, and black bifold French door

What is Lattice?

Lattice is designed of thin strips of wood most commonly applied in a criss-cross composition for trellises to assistance climbing crops in gardens or to serve as porch skirting.

But it’s fantastic for simple wall molding projects much too. (Kind of like Sharpie shiplap but way more legit.)

The price tag of molding has skyrocketed recently (together with each other dwelling advancement supply), so we figured out a way to include dear hunting batten wall molding for the fraction of the cost making use of handy dandy lattice strips at $1.28 for each linear foot.

If you’ve never installed any kind of molding right before, it’s the great novice variation to test due to the fact it demands no miter cuts and lattice can sit flush correct on top of your present baseboards considering that they’re thinner than frequent 1×2 boards.

a stack of lattice strips

How to Make a Batten Wall Applying Lattice Strips

You could increase this vertical batten wall all all over the area, as wainscoting, or just as a board and batten accent wall. You could go away your partitions plain without any wall decor for a minimalist solution or layer it with art for even more character.

It would be great for including onto a simple kitchen area island far too. Keep in brain even though, if you have a textured wall, the system won’t be as straightforward, considering the fact that you will need to have to incorporate these MDF panels to your textured walls working with Liquid Nails and brad nails 1st.


Measures to Make a Batten Lattice Wall

measuring a wall to place lattice strips for a DIY batten wall

Step 1 – Measure and Come to a decision on a Layout

Evaluate your entire wall initial, make your mind up how considerably aside you want your batten (vertical lattice strips) to be, and mark their placement on the wall with a pencil.

Don’t forget that lattice strips are 1 1/2″ huge, so element that into your layout approach. We established our battens to have an 8 1/2″ gap in between.

Move 2 – Lower Lattice Duration

Evaluate the peak of your wall from baseboard to crown and cut the 1st lattice strip to the needed length with a jigsaw. (Not all partitions will be completely the very same height all the way across, so really do not slice all of your lattice primarily based on that 1st measurement.)

checking with a level to make sure lattice strips are perpendicular

Phase 3 – Use a Amount to Examine Lattice Placement

“Dry fit” the first lattice strip and use a amount to make certain it’s perfectly straight.

Action 4 – Nail Lattice

The moment you are content with the lattice strip placement, nail it to the wall with the brad nailer (or a hammer).

You can use design adhesive right here as perfectly, if you opt for, but because the lattice is so light-weight, it is totally optional. (The batten wall will also be less difficult to remove with no adhesive afterwards if a person day you alter your thoughts.)

installing lattice strips for wall molding by dry fitting

Action 5 – Repeat

Repeat Techniques 2-4 right up until you’ve put all lattice strips together the wall.

nailing lattice strips to a wall for DIY batten wall molding

Move 6 – Caulk Cracks and Wood Fill Nail Holes

Caulk all of the edges of the lattice strips to fill all of the cracks, and fill all of the nail holes with wood filler.

caulking and wood filling lattice strips

Action 7 – Sand Wooden Filler

Once the wood filler is fully dry, sand clean with fine grit sandpaper (we use an orbital sander to make the course of action go faster). Brush away any sanding dust after.

batten wall after caulking, wood filling, and sanding smooth before painting

Step 8 – Paint

Give all the things a new coat of paint and you’re completed! (We painted the wall very first with the identical shade we prepared to use on the lattice strips so that we would not have to do the job all over all of the details afterwards.)

batten wall painted white with brass vintage style sconces and green banquette

The Concluded Batten Wall

Really don’t you think these two batten walls incorporate so substantially to this minor breakfast nook corner? I adore it so substantially!

We additional these vintage type sconces to provide a lot more gentle into this windowless house. What do you imagine?!

They get the job done so effectively with this linear chandelier that provides a touch of contemporary, and the brass pops from that batten wall we painted Benjamin Moore Chantilly Lace.

breakfast nook with green banquette bench, white batten wall made of lattice strips, and brass lighting

Wrapping Up Breakfast Nook Aspects

I nonetheless approach to paint the air vent and insert knobs to the banquette cabinet doorways.

(Now that it is dry, I have to confess, really don’t adore the paint I experienced to use on the banquette many thanks to provide chain difficulties creating my beloved cabinet paints to be marketed out. But oh nicely. If that is our most important obstacle, I’ll get it.)

I just got the get in touch with this week that the recently reupholstered cushions are completed! So it will all be coming with each other in listed here quickly.

These Do it yourself herringbone LVP flooring even now seem definitely remarkable given that we put in them a couple of weeks back! Following on the checklist is making a table, refinishing some secondhand dining chairs for the other side, and introducing some vintage artwork and decor finds.

It will be so charming as we wrap up the closing specifics.

olive green banquette bench in a breakfast nook with white batten, herringbone floors, and black door

Have you ever finished a Do it yourself batten wall in advance of? Or found a new use for lattice strips? They are the finest for so several things!

More Project Concepts Working with Lattice Strips

If you want much more wall molding ideas, listed here are a few a lot more far too.

A lot more Do-it-yourself Wall Molding Strategies


Resource url